Application: The HOOVER recessed luminaires are suitable for lighting of areas with higher requirement on the coverage. They are designed for the direct fastening on the ceiling or into the panel false ceiling, M600 and M625 moduls with visible holding blades, and plasterboard. Body: The basic body is made from white painted metal sheet. Cover: The fixture is equipped with structured or opal plexiglass covers. Electric equipment: Inductive or electronic ballasts, three-pole terminal block without screws for the connection of conductors up to 2.5 mm², lamp-holders of fluorescent tube and starter, capacitor. For the connection of the electric components 0.75 mm² conductors are used, IEC 227, T 105 °C, white and blue-white colour. System of fastening: The HOOVER luminaires are designed for mounting into the panel false ceilings, modul 600 x 600 with visible holding blades. The HOOVER2 luminaires are designed for mounting into the panel false ceilings, modul 625 x 625 with visible holding blades, and plasterboard. Minimum height of the false ceiling is 200 mm. System of marking: HOOVER - modul 600 x 600 HOOVER2 - modul 625 x 625 HOOVER3 - plasterboard HOOVER4 - surface mounted