Application: The BARBET - T5 recessed lighting fixtures are suitable for the lighting of interior areas, e.g. offices, shops, corridors, etc. They are designed for the mounting to recessed ceiling modules 600 and 625 with visible systems of carrying bars and to plasterboard. Body: the basic body of the fixture is produced from white painted metal sheet. Louvres : The fixtures can be equipped with two types of louvres: 1. DL type – parabolic louvre from tarnished aluminium sheet. 2. BAP type – parabolic louvre from high polished aluminium sheet. The louvre is attached to the basic body by four spring clips. Electric equipment: Electronic ballasts, three-pole terminal block without screws for the connection of conductors up to 2,5 mm², G5 lampholders. For the connection of the electric components 0,75 mm² conductors are used IEC 227, T 105 °C, white and blue-white colour. Fastening system: The BARBET - T5 fixtures are designed for mounting to recessed ceiling modules 600 x 600 with visible systems of carrying bars and to plasterboard. The BARBET2 - T5 fixtures are designed for mounting to recessed ceiling modules 625 x 625 with visible systems of carrying bars and to plasterboard. A minimum recessed ceiling height is 200 mm. Marking system: BARBET - T5 - modul 600 x 600 and plasterboard BARBET2 - T5 - modul 625 x 625 and plasterboard