Application: The BALOT recessed luminaires are suitable for lighting of interior areas; such as offices, shops, banks, passages etc. They are designed for mounting into the panel false ceilings, modul M600 and M625 with visible holding blades, and plasterboard. Body: The basic body of the fixture is produced from white painted metal sheet (RAL 9010). Louvres: The fixture can be equipped with five types of louvres and plexiglass cover. 1. WR type - longitudinal and transverse blades from white painted sheet. 2. AR type - longitudinal blades from high polished aluminium sheet, the transverse blades from profiled tarnished aluminium sheet. 3. DL type - parabolic louvre from tarnished aluminium sheet 4. BAP type - parabolic louvre from high polished aluminium sheet 5. ST type - parabolic louvre from polished aluminium sheet; cross lamellae from profile matt aluminium sheet 6. BAPE type - parabolic louvre from polished aluminium sheet 7. PX type - optical plexiglass cover Electric equipment: Inductive or electronic ballasts, three-pole terminal block without screws for the connection of conductors up to 2.5 mm², lamp-holders of fluorescent tube and starter, capacitor. For the connection of the electric components 0.75 mm² conductors are used, IEC 227, T 105 °C, white and blue-white colour. System of fastening: The BALOT luminaires are designed for mounting into the panel false ceilings, modul 600 x 600 with visible holding blades. The BALOT2 luminaires are designed for mounting into the panel false ceilings, modul 625 x 625 with visible holding blades, and plasterboard. Minimum height of the false ceiling is 200 mm. System of marking: BALOT - modul 600 x 600 BALOT2 - modul 625 x 625 and plasterboard