Application: The BRIARD fluorescent lighting fixtures are designed for the lighting of assembly and production halls, department stores, corridors and other areas suitable for through-wiring mounting of luminaires in long lighting rows. Body: All types of the BRIARD fixtures use the same cross module of the basic body. The body is produced from white painted metal sheet (RAL 9010), 0.8 mm thick. The body is closed off by white plastic end cap. Reflector: The reflector of the fixture is produced from white painted metal sheet, 0.6 mm thick. All the electric components of the fixture are mounted on it. Electric equipment: Inductive or electronic ballasts, three-pole terminal block without screws for the connection of conductors up to 2.5 mm², lamp-holders of fluorescent tube and starter, capacitor. For the connection of the electric components 0.75 mm² conductors are used, IEC 227, T 105 °C, white and blue-white colour. Fastening system: The lighting fixtures are designed for direct mounting on the ceiling of illuminated area or for the suspension via cable or tube hangers. By means of connecting segment it is possible to make lighting rows. Additional reflectors: They are produced from white painted metal sheet (WR), or high polished sheet (AR). They are fixed on the basic reflector.