Application: The FALCON fluorescent fixtures are suitable for lighting of interiors; such as offices, shops, banks, passages etc. Body: The body of the fixture is made from steel sheet. No plastic components are used in the body of the fixture. Louvres: The fixture can be equipped with five types of louvres and plexiglass cover. 1. WR type - longitudinal and transverse blades from white painted sheet. 2. AR type - longitudinal blades from high polished aluminium sheet, the transverse blades from profiled tarnished aluminium sheet. 3. DL type - parabolic louvre from tarnished aluminium sheet 4. BAP type - parabolic louvre from high polished aluminium sheet 5. ST type - parabolic louvre from polished aluminium sheet; cross lamellae from profile matt aluminium sheet 6. BAPE type - parabolic louvre from polished aluminium sheet 7. PX type - optical plexiglass cover 8. type AS – asymmetrical reflector 9. type ASM – asymmetrical louvre The louvre is attached to the basic body by four spring clips. The advantage of this system is: - guaranteed steadiness of the joint - easy mounting and dismantling - for the change of fluorescent tubes and starters the louvre can be only swung away Electric equipment: Inductive or electronic ballasts, three-pole terminal block without screws for the connection of conductors up to 2.5 mm², lamp-holders of fluorescent tube and starter, capacitor. For the connection of the electric components 0.75 mm² conductors are used, IEC 227, T 105 °C, white and blue-white colour. Fastening system: The lighting fixtures are designed for the direct mounting on the ceiling of illuminated area or for the suspension via cable or tube hangers. These luminaires can be easily arranged in light rows.